0419 420 830

Electrical safety in the home

Avoid the hazards of faulty installation, improper grounding, incorrect operation and poor maintenance of electrical equipment with these key tips.

Look after appliance cords

Keep electrical appliances, their cords and any extension leads away from water. Ensure cords are in good condition – if they’re worn or frayed, don’t use the appliance until it’s been repaired by a licensed electrician.
If you decide to throw away the appliance, make sure it can’t be used by someone else.Only ever disconnect an appliance at the outlet by pulling the plug, not the cord. This extends the life of your appliance.

Avoid piggy-back or ‘double adaptor’ connections

Overloading can occur if too many cords are connected to outlets designed for only one or two plugs. Use power boards with in-built safety devices to avoid a power outlet overload.

Childproof your outlets

Use childproof plugs in electrical outlets to deter children from poking small items into them.

Get a licensed electrician to do your wiring

Call Davy Broadbent licensed electrical contractor if you need electrical wiring or repairs, no matter how minor the job.

Install safety switches

Have safety switches installed at your meter box. As a general rule, electrical equipment should only be used when connected to a safety switch.

Test safety switches

Testing every three months is a good rule of thumb. To do this you just need to press the ‘test’ or ‘T’ button.

If the switch turns off the power, then it’s working correctly. Keep in mind though that the use of safety switches doesn’t mean you can be less careful when using electricity – they are no substitute for proper electrical maintenance and safe practices.

Look out for overhead lines

Avoid coming into contact with overhead lines. If you’re working near them, always keep a safe distance – at least 6.4 metres for wires on poles and 10 metres for wires on towers. Keep this in mind when installing antennas, picking fruit or pruning trees, and using a ladder or a metal tape measure.

Look out for underground power lines

Know the location of any underground power lines before digging at your property.

Look out for water leaks

Water is a good conductor of electricity. If water leaks into the light or power circuits in your home, a fault may develop, which could result in a fire or someone experiencing electric shock. As soon as you notice a water leak, have it repaired by a licensed plumber.

In the event of electric shock

If you feel a tingle when you touch a water fitting, the grounding of your electrical installation could be faulty. If it’s safe to do so, shut off the power at the main switch (usually found in the meter box) and call a licensed electrician to investigate.

If you go to help someone who’s receiving an electric shock, turn off the power at the main switch first. If the current can’t be turned off, use a non-conducting object, such as a broom, chair, rug or rubber doormat to push the person away from the source of the current.

If possible, stand on something dry that doesn’t conduct electricity, such as a rubber mat or folded newspapers.
Call Davy Broadbent Armadale electrician about Electrical safety in your home at any time.

Call 000 for emergency assistance and stay with the person until help arrives.

Need to report a fault or emergency?

Western power Faults 13 13 51 – Call 000 if the situation is life threatening.

Call Now Button